Note: For handling the raw limestone material prior to the cement production and processing plant, please refer to the Quarries & Extractive Industries section
Below are applications covered by SKAKO VIBRATION units within the production & processing plant
Individually designed type CCU feeders, up to 10M long, for transporting raw materials, including hot product, within the processing plant. Usually totally enclosed and dust proof designs, with unbalanced motor drive giving a fixed feed rate. Available to operate on inclines, in addition to the more usual installed horizontal or declined positions.
The classic type FCE electro-magnetic driven feeders with infinitely variable feed rate manual or automated control are utilised to handle the clinker, either in tunnel recovery systems under mass clinker storage facilities or under silos. The feeders and the integral hopper bottom sections are usually lined with special abrasion resistant liners.
Utilising the classic type FCE feeder with integral hopper bottom section, the standard units used would normally be either 400, 560, 800, 1000 or 1250mm wide, covering the capacity range of 0 - 500TPH. Normally supplied in totally enclosed dust proof designs. The electro-magnetic driven feeders allow for very accurate and automated discharge and dosing to be achieved.
FINISHED CEMENT SKIMMING SCREENS
Specially designed totally enclosed protection screens to skim off any oversize prior to bulk storage or bagging. Internal design features prevent 'flushing'. The units are usually 1000 or 1250 mm wide, handling up to 125TPH.